Máy Laser Fiber ST-150300JH-2000W cắt tấm kim loại

Fiber laser cutting machine with change table. Enclosure design. IPG 2000W fiber laser generator YLS-2000. Cut max 8mm stainless steel, 16mm mild steel. Adopting double gear rack closed-loop system and America Delta Tau Systems Inc PMAC Controller, enable high processing accuracy and high working efficiency during high speed cutting

Full Closed Fiber Laser Cutting Machine with Pallet Changer ST-150300JH-2000W IPG

Highlights

• Adopt double gear rack closed-loop system and America Delta Tau Systems Inc PMAC Controller which enable high processing accuracy and high working efficiency during high speed cutting.

• Standard collocation of IPG 2000W fiber laser generator YLS-2000, realizes low operation and maintenance cost and maximum longer-term investment returns and profits.

• Enclosure design meets CE standard which realizes reliable and safe processing. Change table is saving time for material uploading and unloading and further promotes working efficiency.

Laser Cutting Capacity

Material	Cutting Limit
Carbon Steel	16mm (good quality)
Stainless Steel	8mm (good quality)

Speed Chart

Thickness	Carbon Steel	Stainless Steel	Aluminum
	O2	Air	Air
1.0mm	450mm/s	400-450mm/s	300mm/s
2.0mm	120mm/s	200-220mm/s	130-150mm/s
3.0mm	80mm/s	100-110mm/s	90mm/s
4.5mm	40-60mm/s
5mm		30-35mm/s
6.0mm	35-38mm/s	14-20mm/s
8.0mm	25-30mm/s	8-10mm/s
12mm	15mm/s
14mm	10-12mm/s
16mm	8-10mm/s

Main Components and Parts

Article Name	Spec	Qty	Origin	Remark
Fiber laser generator	2000W	1 set	IPG
Focus lens		1 set	II-V  (America)
Servo motor and driver		3 sets	YASKAWA  (Japan)
Ball screw rod		3 sets	ABBA  (Taiwan)
Gear rack		2 sets	ATLANTA  (Germany)
Reduction box		2 sets	APEX  (Taiwan)
Laser head

ST-150300JH-2000W Full Closed Fiber Laser Cutting Machine with Pallet Changer
Laser power	2000W
Laser source	IPG fiber laser generator YLS-2000
Laser generator working mode	Continuous/Modulation
Beam mode	Multimode
Processing surface (L × W)	3000mm x 1500mm
X axle stroke	3050mm
Y axle stroke	1550mm
Z axle stroke	100mm/120mm
CNC system	America Delta Tau Systems Inc PMAC Controller
Power supply	AC380V±5% 50/60Hz (3 phase)
Total Power consumption	16KW
Position accuracy (X, Y and Z axle)	±0.03mm
Repeat position accuracy (X, Y and Z axle)	±0.02mm
Maximum position speed of X and Y axle	120m/min
Max load of working table	900kg
Auxiliary gas system	Dual-pressure gas route of 3 kinds of gas sources
Format supported	AI, BMP, PLT, DXF, DST, etc.
Floor space	9m x 4m
Weight	14T
***Note: As products are constantly updated, please contact us for latest specifications. ***

Fiber Laser Cutting Machine Applicable Materials

Cutting stainless steel, carbon steel, mild steel, alloy steel, galvanized steel, silicon steel, spring steel, titanium sheet, galvanized sheet, iron sheet, inox sheet, aluminum, copper, brass and other metal sheet, metal plate, metal pipe and tube, etc.

Fiber Laser Cutting Machine Applicable Industries

Machinery parts, electrics, sheet metal fabrication, electrical cabinet, kitchenware, elevator panel, hardware tools, metal enclosure, advertising sign letters, lighting lamps, metal crafts, decoration, jewelry, medical instruments, automotive parts and other metal cutting fields.

Fiber Laser Metal Cutting Samples

Fiber Laser Cutting Advantage

(1) Fiber laser cutting machine is for metal precise cutting powered by fiber laser technology. The quality fiber laser beam results in faster cutting speeds and higher quality cuts compared to other cutting solutions. The key advantage of a fiber laser is its short beam wavelength (1,064nm). The wavelength, which is ten times lower than that of C02 laser, generates high absorption into metals. This makes the fiber laser become a perfect tool for cutting metal sheets of stainless steel, carbon steel, mild steel, aluminum, brass, etc.

(2) The efficiency of a fiber laser far exceeds traditional YAG or CO2 laser. The fiber laser beam is capable of cutting reflective metals with much less energy as the laser is absorbed into the metal being cut. The unit will consume little to no energy when not active.

(3) Another advantage of fiber laser is the use of highly reliable single emitter diodes with projected lifetimes greater than 100,000 hours of continuous or pulsed operation.

(4) Golden Laser software allows for the capability to control power, modulation rate, pulse width and pulse shape giving the user full control of the lasers capabilities.

Công ty chúng tôi rất hân hạnh được hợp tác và phục vụ Quý khách hàng.

Mọi thông tin chi tiết Quý khách vui lòng liên hệ:

Công ty TNHH Đầu Tư Quốc Tế Việt Nam

Đ/c: Số 18BT4-1 khu đô thị Trung Văn, Nam Từ Liêm, Hà Nội

Tell: 04 3566 6727 - 04 4450 8666 _ Hotline: 0912 817 066 - 0901 754 566

Website: maylaserhn.com - vinco.com.vn